Home - Return to Previous Page
Additional Images

1965 - 1970, 1996-2010 Mustang 5.0L Coyote Swap Accessory Bracket Kit

SA-9610-50CS

65 - 70 & 96 - 10 Mustang Coyote Swap Front Drive Mount Kit for Naturally Aspirated or Supercharged Coyote Engines

This coyote front drive accessory kit will allow you to add power steering to the front of the Coyote Motor and pulls the accessories tight to the motor to give you the best clearances when swapping a Coyote motor into a classic 65-70 Mustang or Fox Body/New Edge Mustang. This Kit allows you to use 1996 - 2010 Mustang GT Engine AC Compressor and the Power Steering Pump with the factory Coyote Alternator. This kit is designed to keep the front drive accessories close to the block to maximize room in your engine bay for the radiator, fans and frame rail clearances. This kit will work with the 2011 - Up Coyote Alternators (clutch-less type) which were used in automatic transmission cars.

This bracket kit is designed to add the AC compressor and power steering pump from the 96-2010 Mustang GT not only onto the coyote engine, but put them in their stock locations. So, for 1979-2010 Mustang owners looking to swap this means that stock AC and power steering lines can be reused or added for donor vehicles. All brackets are machined out of billet aluminum and anodized with a black finish.

We also have a version of this kit for Supercharged Engines. This option is compatible with either VMP or Roush Supercharger kits and will allow you to keep the same power steering pump and ac compressor while adding a positive displacement supercharger to your Coyote Motor (see this option below). For 65-70 Mustang Owners, please see notes below about front suspensions. If you have a question about your front suspension, please give us a call.

Sold as KIT

Pricing: $749.00

Customize Your Item

- Coyote Engine Bracket Options -
 * required
Qty:
FREE SHIPPING on orders *$199 or more

Technical Notes

Classic Mustang Installation: This kit will also work with 1965-70 Mustang Coyote Engine Swaps IF you are installing a Heidts (PRO-G Generation 1 Kit) or a TCI IFS Kit. Kit will also work with 1, 2 and 3 GENERATION COYOTE MOTORS!!

Highlights of the kit:

  • ALLOWS USE OF POWER STEERING PUMP ON COYOTE ENGINE

  • WORKS WITH 2011-UP MUSTANG COYOTE ALTERNATOR ONLY. ALL ALTERNATORS MUST HAVE CLUTCH-LESS PULLEY

  • KIT COMES WITH BRACKETS FOR ALL ACCESSORIES, HARDWARE, BELT TENSIONER, AND SERPENTINE BELTS.

  • ALL ACCESSORIES RETAIN FACTORY POSITION(96-2010) ALLOWING ORIGINAL HOSES AND HARNESSES TO BE USED.

  • BRACKETS ARE MADE IN THE USA

  • MACHINED OUT OF BILLET ALUMINUM

  • MAXIMIZES ROOM IN ENGINE BAY


IMPORTANT PRODUCT FITMENT INFORMATION:

  • ALL KITS WORK WITH AC COMPRESSOR AND POWER STEERING PUMP FROM 1996-2010 MUSTANG GT

  • KIT WORKS WITH MUSTING TIMING COVER ONLY FROM Late 2011-19.

  • SUPER CHARGER VERSION OF THE KIT WORKS WITH VMP AND ROUSH SUPERCHARGER SYSTEMS! WILL ALSO WORK WITH PROCHARGER SYSTEMS WITH MODIFICATION.

  • NEWER DESIGN TIMING COVER REQUIRED(REFER TO GALLERY FOR PHOTOS OF THE TIMING COVER)

Special Notes

Stang-Aholics is now offering Coyote engine swap brackets. This kit allows you to use 96 - 10 accessories to complete your Coyote swap. We also now offer an option to use the 5.0 Coyote Alternator in the option set. Furthermore, we also have a kit that is designed to work with either the VMP or Roush Superchargers on the Coyote 5.0 Engine. 

These Brackets are High Quality- Machined out of billet aluminum and anodized with a black finish. All brackets are made to keep the accessories tight to the block which maximizes room in the engine bay for radiator, fan and frame rail clearances.

Product Features:

  • Allows use of the 96-10 AC Compressor, and Power Steering pump and the 2011 - UP Coyote Alternator. Please note: it must be an AUTOMATIC Transmission Coyote Alternator because of the clutch on the pulley. 

  • Kit comes with brackets for all accessories, hardware, belt tensioner, and serpentine belts 

  • Retain factory positions allowing original hoses and harnesses to be used

  • Machined out of Billet Aluminum

  • Maximizes room in engine bay

  • Bolt On Application

  • Brackets are made in the USA

Kit Includes:

1 Power Steering Belt

1 Alternator/AC Belt

1 Power Steering Tensioner

1 Alternator/AC Tensioner

1 Power Steering Bracket

1 AC Bracket

1 Throttle Body Spacer

All Necessary Attaching Hardware

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 11.0 lbs.
  • W15.0000” x H9.0000” x L15.0000”
  • FREE SHIPPING on orders *$199 or more

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.