1968 Mustang Shelby-Styled Fiberglass Front Valance and Headlight Extensions
Must Use with 1968 Fiberglass Hood Part BOD-068-014
Transform your 1968 Mustang into a Shelby-inspired classic with this fiberglass front-end conversion kit. This package combines the Shelby-style lower nose panel, LH and RH headlight extended buckets, and upper nose letter panel to tie it all together and create the distinctive extended front-end appearance of the iconic 1968 GT-350 or GT500 Styled Mustang. Designed to only be paired with the correct 1968 Shelby-styled fiberglass hood, this kit is an ideal foundation for restoration, tribute, and custom Mustang builds. Each component is manufactured in fiberglass in the USA and designed for proper installation, fitting, and finishing as part of a complete front-end conversion.
SOLD AS KIT
Description
1968 Mustang Fiberglass Front End Conversion Kit
Bring the unmistakable styling of the 1968 Shelby GT350 and GT500 to your Mustang with this complete fiberglass front-end package from Stang-Aholics, manufactured by CPC. Rather than sourcing the major components individually (or from different vendors), this kit combines the fiberglass front-end pieces that are designed to work together properly, into one package for your build.
Kit Includes
1968 Fiberglass Lower Valance —
The foundation of the Shelby-style front end, this fiberglass lower valance nose panel creates the extended nose profile characteristic of the 1968 Shelby Mustang. Mounting studs are supplied but not installed.
1968 Fiberglass Extended Headlight Housing — LH (Driver Side)
Fiberglass left-hand headlight bucket featuring pre-threaded mounting holes. Supplied mounting studs allow the installer to position and secure the bucket during installation.
1968 Fiberglass Extended Headlight Housing — RH (Passenger Side)
The matching right-hand fiberglass headlight bucket completes the Extended Length headlight configuration. Pre-threaded mounting holes and supplied studs simplify installation.
1968 Fiberglass Upper Nose (Hood Extension) Letter Panel —
Hand-laid fiberglass upper nose panel (Hood Extension) for lettering/emblem placement. Ties the Extended headlight housings together and completes the upper perimeter of the main front grille. Mounting stud hardware is included.
Fiberglass Construction
All components are manufactured in the USA and hand-laid from fiberglass and made for classic Mustang restoration and custom applications. Fiberglass parts require proper test fitting, preparation, bodywork, and finishing before final installation and paint. Depending on the vehicle and installation, additional fitting or modification may be necessary.
Professional installation is recommended, particularly for show-quality restorations and custom builds.
Important Fiberglass Information
Fiberglass components are made to order and may require additional preparation and fitting prior to installation. Production and fitment can vary depending on the vehicle and installation method.
Because these are special-made fiberglass products, all fiberglass sales are final. Cancellations after production has begun may be subject to a 30% cancellation fee, and products cannot be canceled once production is complete.
Recommended Companion Part
1968 Mustang Shelby-Style Fiberglass Louvered Hood — CPC-BOD-068-014
Add the correct fiberglass hood to complete the Shelby-style front-end conversion and achieve a cohesive finished appearance.
Special Notes
1968 Mustang Fiberglass Front End Conversion Kit
Bring the unmistakable styling of the 1968 Shelby GT350 and GT500 to your Mustang with this complete fiberglass front-end package from Stang-Aholics, manufactured by CPC. Rather than sourcing the major components individually (or from different vendors), this kit combines the fiberglass front-end pieces that are designed to work together properly, into one package for your build.
Kit Includes
1968 Fiberglass Lower Valance —
The foundation of the Shelby-style front end, this fiberglass lower valance nose panel creates the extended nose profile characteristic of the 1968 Shelby Mustang. Mounting studs are supplied but not installed.
1968 Fiberglass Extended Headlight Housing — LH (Driver Side)
Fiberglass left-hand headlight bucket featuring pre-threaded mounting holes. Supplied mounting studs allow the installer to position and secure the bucket during installation.
1968 Fiberglass Extended Headlight Housing — RH (Passenger Side)
The matching right-hand fiberglass headlight bucket completes the Extended Length headlight configuration. Pre-threaded mounting holes and supplied studs simplify installation.
1968 Fiberglass Upper Nose (Hood Extension) Letter Panel —
Hand-laid fiberglass upper nose panel (Hood Extension) for lettering/emblem placement. Ties the Extended headlight housings together and completes the upper perimeter of the main front grille. Mounting stud hardware is included.
Fiberglass Construction
All components are manufactured in the USA and hand-laid from fiberglass and made for classic Mustang restoration and custom applications. Fiberglass parts require proper test fitting, preparation, bodywork, and finishing before final installation and paint. Depending on the vehicle and installation, additional fitting or modification may be necessary.
Professional installation is recommended, particularly for show-quality restorations and custom builds.
Important Fiberglass Information
Fiberglass components are made to order and may require additional preparation and fitting prior to installation. Production and fitment can vary depending on the vehicle and installation method.
Because these are special-made fiberglass products, all fiberglass sales are final. Cancellations after production has begun may be subject to a 30% cancellation fee, and products cannot be canceled once production is complete.
Recommended Companion Part
1968 Mustang Shelby-Style Fiberglass Louvered Hood — CPC-BOD-068-014
Add the correct fiberglass hood to complete the Shelby-style front-end conversion and achieve a cohesive finished appearance.
Details
- CPC-68S-CFE
- CPC-68S-CFE
- California Pony Cars
- THIS IS A MADE TO ORDER ITEM. AVERAGE LEAD TIME 3-4 WEEKS, PLEASE CALL FOR MORE DETAILED LEAD TIME.
- New
Categories
Shipping Information
- Item Requires Shipping
- 65.0 lbs.
- W28.0000” x H28.0000” x L69.0000”
- $250.00
- This item ships in its own box.
- This item will require a special quote for shipping charges.
- Ships via Truck Freight. Best to ship to a Commercial Business Address if Possible.
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!