Home - Return to Previous Page
Additional Images

1969 Mustang Fastback Dynacorn Body Shell

DI-MS69FB

Completely New 1969 Mustang Fastback Body Shell

Completely New 1969 Dynacorn Mustang Fastback Body Shell. This all new steel body will provide an excellent platform to build your dream custom Mustang you have always wanted. This all body shell will provide some extra Strength And Reinforcement over an above the original body, it Comes With A One Piece Seat Platform for extra rigidity. If your project car is completely rusted, has been in an accident and will require substantial sheet metal work, this all new shell can provide a good platform to jump start your custom car project. It comes With Doors, Trunk Lid And Reinforced Big Block Shock Towers. However, the Hood and Fenders are not included, but can be purchased at the same time and shipped with your new body! Each new Body expertly assembled in Southern California and is Officially Licensed From Ford!

Sold as EACH

Shipping: This Body Requires a Custom Shipping Quote. Crating Fee of $495 is required on top of shipping.
Was: $18,000.00
Sale: $17,495.00
Save: 3%
Save: $505.00
Qty:

Special Notes

Why Purchase A Dynacorn Classic Body? 

 
Licensed Restoration Part 
These licensed replacement body shells are completely assembled from the firewall to the tail lamp panel and from the frame rails up to the windshield frame.
 
Saves you Time:
All the way from the core support to New firewall to the tail lamp panel; these body shells are expertly fitted, assembled and welded. This gives you a Huge time saves over starting with a rusted or severely damaged body. 
 
1006 Automotive Grade Steel:
Coated with special galvanization to protect against rust.
 
New Body Assembly:
These Dynacorn body shells are as close as you can get to an all new Classic Body without purchasing a car built on the assembly line. Let the experts handle much of the heavy lifting for you. From design to production to packaging these Dynacorn Classic Bodies provides a complete start to finish service to ensure we control the quality of our replacement body shells.
*Some Additional fitting required.
 
Industry Experience: 
Since 2004 Dynacorn has provided 15 Years of Excellence and innovation in the automotive aftermarket industry.
 
Assembled in the USA: 
Each Dynacorn Classic Body is proudly expertly assembled and welded in their facility in Camarillo, California.
 

*Important Shipping and Handing Notes: 

 
There is a Crating and Handling Charge of $495.00. All Bodies are shipped FOB Oxnard, California freight prepaid, or you can make your own freight arrangements.
 
All Dynacorn Replacement Body Shells are encased in raw-steel 2" x 2" tube cages w/ shoes for forklift transport. These cages are welded and bolted to the bottom of the shell. Prior to shipping, each shell and cage will be in custom crating.
 
The 1967 Replacement Body Shell does not come with side or quarter panel scoops or quarter panel extensions. Some of the weld in components (ie. quarter panels, tail light panels) will come in a weld through primer and other bolt on parts will come EDP coated for rust protection. Blue paint shown in any pictures is for illustration purposes only.

FAQs

Where Can I find Information on State Vehicle Registration?

The process to register your vehicle is different for each state; therefore we recommend visiting your state’s DMV website for up-to-date information on how to register your vehicle. You can also visit SEMA Action Network‘s website for more information about titling and registration.


 

What are the Body Shells Made From?

Dynacorn Classic Body Shells are 100% all-steel:

  • Trunk Floor: 1.0 m/m
  • Rocker Panel: 2.0 m/m
  • Rocker Panel Inner Brace: 3.0 m/m
  • Rear Frame Rails: 2.3 m/m
  • Firewall and Torque Bar: 1.2 m/m

 

What Type of Payment is Accepted? 

All Body Orders must be paid in Full and in Advance by Certified Bank Check, ACH Payment (E-Check Payment) or bank Wire Transfer. Sorry, we cannot accept Credit or Debit Cards for Payment. 


 

How is the New Body Shell Delivered to Me? 

All Body deliveries are made by a common Vehicle carrier to the Continental US only. You Must have a delivery address that can unload the body from a truck with a Fork Lift capable of handling a body shell in the a steel crate. Stang-Aholics will charge the exact shipping that Dynacorn charges to have the body delivered to your preferred address. We will obtain a quote and contact you with the exact freight charges before moving forward with your order. You can also arrange your own carrier from the Camarillo, CA Warehouse. However, you would be responsible for arranging pick-up and all fees and insurance costs for your carrier of choice.


 

Can we ship a body Internationally? 

No, We cannot ship a Dynacorn body Directly to you internationally. We can help arrange the shipment of the body to a forwarder/port within the United States. You will need to cover the cost of shipping the Dynacorn body to a port or freight forwarder of your choosing within the 48 United States. Then, you will need to arrange the shipping from that Port/Forwarder to your international destination/address.


 

What is MSO or MCO?

MSO stands for Manufactures Statement of Origin. MCO stands for Manufactures Certificate of Origin. MSO or MCO states that the manufacturer made it new and that it has never been titled, but transferred to an entity (dealer, other manufacturers to modify, or to a financial holding company). This does two main things: it clearly states that the item is new and has not been titled before, but shows legal ownership (it allows the sale or transfer without titling). This type of transfer does not require any state or federal fees.

 

Details

Shipping Information

  • Item Requires Shipping
  • This item will require a special quote for shipping charges.
  • This Body Requires a Custom Shipping Quote. Crating Fee of $495 is required on top of shipping.

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.