65 - 70 Mustang TCP Manual Rack And Pinion Kit
65-70 Mustang Total Control Products, MANUAL Rack and Pinion
This Patented Line Of High Performance Center-take-off Rack And Pinion from Total Control Products Enables Correct Geometry And A Level Of Positive, Direct Steering That Is Not Possible With Adapted OEM Units. Bolt-in Kit to the stock Mustang Frame.
Sold as KIT
Both manual and power versions feature quick ratio, straightcut gears, requiring only three turns lock-to-lock (standard OEM 4-5/8 turns, Performance OEM 3-3/4 turns). The unique modular design utilizes an assortment of mounting brackets and centerlinks to adapt to various classic Ford/Mercury vehicles including Mustangs, Cougars, Falcons, Comets and Rancheros.Existing factory mounting locations are used whenever possible to simplify rack installation. Once installed, the rack becomes a rigid crossmember bracing the lower control arm mounts; an improvement over the original bent tubular design.
PLEASE NOTE: Installation of rack-and-pinion system on '60-65 Falcons and '64-66 Mustangs requires V8 spindles and tie-rod assemblies.
**Rack Kits DO NOT come with Inner and Outer Tie Rod end assemblies. You can use your stock tie rods or we offer new inner and outer rods**
TCP Rack and Pinion Features and Benefits:
Quicker Ratio - A quicker ratio means fewer turns of the steering wheel while maintaining the same turning radius. Our Rack & Pinion requires only 3 turns from lock-to-lock. The factory steering systems were a slow responding 4 turns. A more sensitive steering system will get you pointed in the right direction in less time. You will enjoy quicker turning response and more confidence in all types of driving situations.
Highest Quality - Every component is manufactured from the highest quality materials available. Billet steel construction of the internal gears, stainless steel lines, durable rubber boots, grade 8 mounting hardware combined to give you a reliable and quality steering system.
Easy Installation - This kit has been designed for the easiest possible installation. Whenever possible, factory mounting locations are used and extensive cutting is avoided. We provide detailed installation instructions with photos to make the installation as straightforward as possible. The TCP rack will clear most aftermarket headers and work with small or big block engines
- Item Requires Shipping
- 42.0 lbs.
- W11.0000” x H10.0000” x L40.0000”
- FREE SHIPPING on orders *$199 or more
- This item ships in its own box.
Total Reviews (0)
Write the First Review!
You must login to post a review.