Home - Shop by Category - Engine - Fuel System - Tanks
Additional Images

1964 - 68 Mustang Fuel Tank for EFI Conversions, 340 LPH Electric Pump In Tank

AER-18697

Mustang Stealth Gas Tank for EFI Conversion, In Tank Pump with 340 LPH (Liters for Hour) Flow

64 65 66 67 68 New Classic Mustang EFI fuel tanks feature a pre-installed, in-tank 340 Stealth Fuel Pump and complete, in-tank performance baffling. These tanks with in-tank pumps are great for high horsepower application EFI conversions and a late model EFI engine swaps in classic Mustangs and Fords. The 340 LPH in tank pump is good for high horsepower applications. See below for more info and about RACE ONLY Application.

If you are swapping a naturally aspirated engine with 450 or less horsepower see our other fuel tank kit with 200 LPH in tank pump. Part # AER-18698

Sold as KIT

Shipping: This item ships in an oversize box. Flat Rate Shipping Applies.
Pricing: $1,009.95

Customize Your Item

- Add Deluxe Fuel Pump Wiring Kit -
 * required
Qty:

Special Notes

These Aeromotive 1964-68 1st Gen Mustang Stealth fuel tanks feature an Aeromotive 340 Stealth electric fuel pump mounted to a billet aluminum, black anodized hanger assembly. The 340 Stealth electric fuel pumps boast an impressive 340 lph flow and use a turbine pump mechanism for increased durability and performance.

The 1964-68 Mustang Stealth fuel tanks also features an innovative baffling/tray system to control fuel slosh and keep the 340 Stealth fuel pump submerged ensuring consistent pump performance even at low fuel levels and extreme driving conditions. The tanks include a Ford 73-10 ohm sending unit that comes pre-installed, pre-pump filter sock, internal return line tubing, and three AN ORB ports, one for the feed line, one for the return line, and one for the vent. For extra protection, the tanks are silver powder coated for maximum durability.

Please Note: Stealth Fuel Tanks are not engineered for competition drag racing or road racing applications where extreme acceleration and cornering will occur with fuel levels lower than 1/2 tank. Racing fuel, cells Fuel cell or bladder style road racing tanks with the appropriate baffling and gated collectors are recommended for these types of applications.

Technical Notes

Mustang Stealth Fuel Tanks Feature:


Stamped Steel Fuel Tank fits 1964-1968 Ford Mustangs
Silver Metallic Painted finish
EFI-style internal baffling
73-10 Ohm Universal Fuel Level Sending Unit
Bolt-On Flanged Filler Neck Adapter
60 degree Universal Rubber Filler Neck
Black Anodized Pump Hanger Assembly
340 LPH (Liters Per Hour) Stealth Fuel Pump (P/N 11140)
Pre-Pump Filter Sock Assembly
(3) ORB-06 Ports - Outlet, Return and Vent
Tank Has a 16 Gallon Capacity
 

340 Stealth Tank Horsepower SPECS:

Tank has 340 LPH (Liter Per Hour) Pump inside tank. Perfect for higher horsepower applications.  

Fuel Injected Engines:
Up to 850 HP - naturally aspirated
Up to 700 HP - forced air induction
Carbureted Engines:
Up to 1000 HP - naturally aspirated
Up to 800 HP - forced air induction

PLEASE NOTE: If you have a lower horsepower engine (450 HP or less), see our tank with the 200 LPH (Liter Per Hour) Pump. Part # AER-18698

Product Video

EPA Warning

WARNING: This is a RACE ONLY product manufactured and sold for installation on vehicles to be used solely for competition purposes, which, once installed, may never be used, or registered or licensed for use upon a public road or highway. If you install this part on your vehicle and use that vehicle on a public road or highway, you will be considered in violation of the Clean Air Act and personally subject to a civil penalty of $4,454.

AER-18697
Clean Air Act Title II Section 203 Code 7522(a)(3)

(A) for any person to remove or render inoperative any device or element of design installed on or in a motor vehicle or motor vehicle engine in compliance with regulations under this subchapter prior to its sale and delivery to the ultimate purchaser, or for any person knowingly to remove or render inoperative any such device or element of design after such sale and delivery to the ultimate purchaser; or

(B) for any person to manufacture or sell, or offer to sell, or install, any part or component intended for use with, or as part of, any motor vehicle or motor vehicle engine, where a principal effect of the part or component is to bypass, defeat, or render inoperative any device or element of design installed on or in a motor vehicle or motor vehicle engine in compliance with regulations under this subchapter, and where the person knows or should know that such part or component is being offered for sale or installed for such use or put to such use.

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 34.0 lbs.
  • W22.0000” x H10.0000” x L41.0000”
  • $49.00
  • This item ships in its own box.
  • This item ships in an oversize box. Flat Rate Shipping Applies.

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.