1967 Mustang Master Body Hardware and Bolt Kit
Restore Your 1967 Mustang With Factory-Correct Body Hardware
Complete your classic Mustang restoration with the AMK Products Master Body Hardware and Fastener Kit for 1967 Mustang. Designed specifically for 1967 Mustangs, this comprehensive hardware kit provides the factory-correct fasteners needed to properly reinstall much of your Mustang's original sheet metal and exterior body components.
Instead of hunting down individual screws, bolts, nuts, washers, clips, and specialty fasteners, you get 444 pieces in one organized kit. Each hardware set is individually packaged and clearly labeled, making it easier to identify the correct fasteners during assembly. The kit covers approximately 85% of the original factory-correct body hardware needed for a 1967 Mustang restoration, helping save both time and the expense of purchasing dozens of individual hardware sets.
Note: This kit is for standard 1967 Mustangs and is not intended for 1967 Shelby GT350/500 models.
Sold as KIT
Description
How many pieces are included in the 1967 Mustang Master Body Kit?
The kit contains 444 total pieces of factory-correct, OE-style body hardware.
What percentage of the original body hardware does this kit replace?
AMK Products states that the kit contains approximately 85% of the original factory-correct body hardware required for a 1967 Mustang.
Is the hardware organized?
Yes. The hardware is divided into individually packaged sets, with each package labeled for its specific application and the required quantity identified.
Does this kit fit a 1967 Shelby GT350/500?
No. This kit is not for 1967 Shelby GT350/500 models. A separate Shelby-specific master body kit is available.
What finish does the hardware have?
Black phosphate is the primary finish used throughout the kit because it matches the factory-correct finish for many applications. Other finishes are included where necessary.Is this a complete Mustang restoration hardware kit?
It is a comprehensive body hardware kit, not an all-inclusive hardware kit for every system of the vehicle. It covers approximately 85% of the original body hardware and includes fasteners for numerous exterior sheet metal and body applications. Separate chassis, interior, and other specialty hardware kits may be required depending on the scope of your restoration
Special Notes
Complete 1967 Mustang Body Hardware in One Kit
Whether you're replacing rusted fasteners, installing new sheet metal, or performing a ground-up restoration, the AMK Products Master Body Kit gives you a broad selection of application-specific hardware.
The Body Hardware/Bolt kit Typically includes hardware for the following areas:
- Battery tray mounting
- Front and rear bumper guards
- Front and rear bumpers
- Bumper brackets
- Cowl braces and cowl seal brackets
- Exterior door handles
- Door hinges
- Door latch strikers and latches
- Fender mounting
- Fender splash shields
- Floorboard hole covers
- Front grille and grille ornament
- Lower grille support
- Headlight doors and housings
- Hood and hood hinges
- Hood latch and auxiliary catch
- Hood latch support and brace
- Exterior door mirror
- Quarter panel extensions
- Shock tower braces
- Stone deflector
- Trunk latch and striker
- Trunk lid and hinges
- Front and rear valances
- Grille bars
- Headlamp adjusters
Factory-Correct Hardware for an Authentic Restoration
Restoring a classic Mustang is about more than making everything fit. The right fasteners help preserve the appearance and authenticity of the finished car.
AMK Products builds this master body kit around OE-style, factory-correct fasteners, with black phosphate used as the primary finish where appropriate. Other finishes are included where required for specific applications, including stainless steel capped bumper bolts and chrome exterior mirror screws.
That attention to detail makes this kit particularly useful for concours-oriented restorations, traditional restorations, and projects where original-style hardware matters.
Organized for Easier Installation
One of the biggest advantages of the 1967 Mustang Master Body Kit is organization. Rather than sorting through a box of miscellaneous hardware and trying to determine which fastener belongs where, AMK Products separates the hardware into individually packaged application sets.
Packages are labeled according to their intended application, and the quantity required for each application is identified. That makes the assembly process easier to manage and helps reduce the chance of missing hardware during your restoration.
Why Choose the 1967 Mustang Master Body Kit?
- 444 total pieces for comprehensive body assembly
- Factory-correct, OE-style hardware
- Approximately 85% of original body hardware
- Individually packaged and labeled sets
- Black phosphate finish on the majority of hardware
- Covers major exterior body and sheet metal applications
- Helps eliminate the need to purchase numerous individual hardware kits
- Designed specifically for 1967 Ford Mustang body applications
Built for 1967 Mustang Restoration Projects
The right hardware can make the difference between a restoration that simply goes together and one that looks and assembles like it should. With hardware for fenders, bumpers, grille components, doors, hood, trunk, valances, cowl components, and other body applications, this AMK Products master kit is an excellent foundation for a 1967 Mustang body restoration.
Frequently Asked Questions
How many pieces are included in the 1967 Mustang Master Body Kit?
The kit contains 444 total pieces of factory-correct, OE-style body hardware.
What percentage of the original body hardware does this kit replace?
AMK Products states that the kit contains approximately 85% of the original factory-correct body hardware required for a 1967 Mustang.
Is the hardware organized?
Yes. The hardware is divided into individually packaged sets, with each package labeled for its specific application and the required quantity identified.
Does this kit fit a 1967 Shelby GT350/500?
No. This kit is not for 1967 Shelby GT350/500 models. A separate Shelby-specific master body kit is available.
What finish does the hardware have?
Black phosphate is the primary finish used throughout the kit because it matches the factory-correct finish for many applications. Other finishes are included where necessary.Is this a complete Mustang restoration hardware kit?
It is a comprehensive body hardware kit, not an all-inclusive hardware kit for every system of the vehicle. It covers approximately 85% of the original body hardware and includes fasteners for numerous exterior sheet metal and body applications. Separate chassis, interior, and other specialty hardware kits may be required depending on the scope of your restoration
Details
- 67Z-M
- 67Z-M
- AMK Products - Bolts and Hardware
- New
Categories
Shipping Information
- Item Requires Shipping
- 11.0 lbs.
- W7.0000” x H5.0000” x L5.0000”
- FREE SHIPPING on orders *$199 or more
- This item ships in its own box.
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!