Coyote 5.0 Oil Pressure Adapter for Dakota Digital Sensor

Oil Pressure Adapter for Dakota Digital Sensor and Gen 1 and Gen 2 Coyote 5.0 Engine Swaps

The Modulator Ford Coyote engine is coming into its own in the hot rod and Muscle car world, and swapping one into your classic vehicle is not without challenges. One of which is connecting your Mustang's aftermarket instrumentation; oil pressure data is not available on the CAN/Bus system for the Dakota Digital BIM-01-2 interface to read, so the supplied 1/8” NPT sensor must be installed. This unique brass adapter is machined here in the USA and features 1/4 inch NPTF male threads to fit your perfectly into your Gen 1 and Gen 2 Coyote block, along with female threads to accommodate the stock Coyote Block sensor. On the side, is a 1/8” NPTF port to accept the Dakota Digital oil pressure sensor, which comes with the Dakota Digital Gauge packages from Stang-Aholics! So, there you have it NO drilling and tapping required, just simply thread in the block and the sensors and continue on with your wiring! Please Note: The Dakota Digital Oil Pressure Sensor is Sold Separately, However, it Comes included in the Gauge Packages Stang-Aholics, Sells!

Sold as EACH