Coyote 5.0 Swap Power Steering Pump with Pulley and Reservoir, No Lines

Power Steering Pump Kit with Pulley and Remote Reservoir for Coyote 5.0 Engine Swap

This is the recommended Power Steering Pump for our Coyote Swap Bracket kit. When used with our front drive kit, the pump will be mounted lower on the driver side where the alternator is originally located on the coyote block. The pump is re-manufactured by Ford and comes backed with a 2 year unlimited mile warranty serviceable at any Ford Dealer nationwide!. This pump comes with a new pulley and a remote fluid reservoir. The remote fluid reservoir is made from fabricated aluminum and is baffled on the inside to prevent aeration of the fluid. The reservoir also includes a vented twist-on cap. The reservoir features AN fittings: -10 AN outlet to pump and -6 AN inlet from gear and can be mounted anywhere in the engine compartment such as the inner fender panels or radiator core support using the built in side mounting tabs. We highly recommend getting the additional AN Fittings to install on the pump pressure and return ports shown on this page.

Sold as KIT