Home - 1964-1973 Mustang Parts - Exhaust - Headers
Click on image to zoom

65-73 Mustang Patriot Full Length Headers for 289/302/351W, Stock OR Borgeson Box, Bare

PHC-H8403

1965-1973 Mustang Patriot Full Length Headers 1-5/8 Inch Primary tubes in BARE Finish For Use With 289/302 or 71-73 Mustang with 351W Engines and Borgeson Steering Box OR Stock Box with Stock Shock Towers

1965-1973 Mustang Patriot Full Length Headers are the number one choice for maximum performance gains and high RPM efficiency. These headers are designed specifically for 260 - 302 Engine in 65-73 Mustangs and 351W Motor in 71-73 Mustangs with the Borgeson Integral Power Steering box Or the Stock Box keeping the stock shock towers in place in the classic Mustangs. The Borgeson steering box dimensions are different than the stock steering box, so these headers will provide the clearances needed for the new box or keeping the stock. Comes with gaskets and hardware. See Special Notes Tab Below for installation notes for fitment.

Sold as KIT

Was: $321.85
Sale: $298.59
Save: 7%
Save: $23.26
Qty:
FREE SHIPPING on orders *$199 or more

Special Notes

Patriot Steel 1-5/8" Full Length Headers for: 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 289/302 Engines OR 71-73 Mustangs with 351W Engine and Borgeson Power Steering Conversion Kit or with a Stock Box.

After the installation of a Borgeson Power Steering Conversion Kit, you may run into header clearance issues. Not to worry, Patriots's full length headers are created specifically to clear the Borgeson setup while providing a fantastic boost in performance and sound.This set of headers will fit your 1965-1973 Mustang equipped with a 289, 302 or 71-73 Mustang with 351W Engine block. Full length headers are typically used for higher RPM horsepower, but can also increase the mid range torque in applications were there is room to fit a long tube design. Comes complete with gaskets, header bolts and collector reducers.

Available in three finishes; raw steel for individual customizing, Hi-Temp Black Coating or Metallic Ceramic Thermal Barrier Coating

Headers Feature:
- 1-5/8" primary tubes
- 3" Collector

-Durable 18-gauge tubing

-Fits with Borgeson Steering Box or Stock Box
- Includes all necessary hardware and gaskets for installation

-Will NOT fit 71 - 73 Mustangs with Manual Transmission or GT40 "P" head

-Will Fit C-6 Transmission and T-5 transmission with hydraulic clutch or stock Z Bar

-Durable 18-gauge tubing

-Limited One Year Warranty

PLEASE NOTE- This product is Not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations and is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle.

Details

Shipping Information

  • Item Requires Shipping
  • 32.0 lbs.
  • W21.0000” x H39.0000” x L11.0000”
  • FREE SHIPPING on orders *$199 or more
  • This item ships in its own box.

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.