Holley EFI Interface Module, Dakota Digital

This Interface Module is designed to read the engine information from the Holley Terminator, HP or Dominator EFI kits. The DDI-BIM-01-2-HLLY module is a direct plug in using the supplied 2 or 4 pin harness for simple connection to the Holley EFI system.

The DDI-BIM-01-2-HLLY will collect and output the following information to Dakota Digital Instrument Systems (The DDI-BIM-01-2-HLLY is designed to decode the information provided by the Holley Terminator, HP and Dominator EFI's and supply this information to the VFD3 rev. G, VHX and HDX control box instrument systems only.  Earlier control boxes (with an aluminum case) are not compatible with the BIM family of Expansion Modules.):

Always available:

• Tachometer
• Engine Coolant Temp
• Intake/ Manifold Temp.
• Fuel Pressure
• Air/ Fuel Ratio

Please note: Due to the various factory and modified ECM's, additional data add-on's from Holley may be available such as Vehicle Speed and Oil Pressure. Dakota Digital cannot guarantee the presence or accuracy of the Coolant Temp., Intake Temp., Fuel Pressure Pressure, or Air/ Fuel ratio displays since this is a function of the ECM and matching OEM functional sensors.