Home - Return to Previous Page
Click on image to zoom

65-73 Mustang Disc Brake Large Bearing Spindles, 70-73 OEM Style

TCP-SPND-01

70-73 Mustang OEM Large Bearing Heavy Duty Disc Brake Spindles, Can Also be used in earlier 65-69 Mustangs with Disc Brakes

Stang-Aholics now offers these completely Brand New direct replacement heavy duty disc-brake spindles for early 65-73 Classic Mustangs and other classic Fords. These all new Spindles are manufactured using modern steel alloys with improved durability and strength over the original OEM spindles. These high quality Mustang spindles are powder coated in a silver finished for long lasting and show quality appearance. These new spindles share Fordโ€™s identical geometry, and can be used with 70-73 OEM disc brakes or aftermarket brakes.

EXCELLENT Upgrade from Smaller Disc Brake spindles on the 65-69 Mustangs that want to run bigger sticky tires with large brakes for performance driving!

NOTE: Installation with other 1965-70 Mustangs and 70โ€™s Ford/Mercury vehicles does require the '70-73 outer tie rods. Tie-rod and bump-steer conversion sets are available from Stang-Aholics to complete your installation in the earlier year Mustangs.

Sold as a PAIR

Pricing: $505.00

Customize Your Item

- Spindle Hardware Kit Option -
 * required
Qty:
FREE SHIPPING on orders *$199 or more

Special Notes

Design/Construction:

These Spindles are created from modern steel alloys, then finish machined for consistent geometry and mounting positions. The overall design is based on Ford’s proven ‘70-’73 disc brake spindle, known for it’s stouter, flowing design with minimized stress concentration areas. The later disc brake spindle style was chosen for its preferable caliper mounting arrangement and large bearing size.

In addition to the strength of the reinforced areas around the caliper mounting bosses, the caliper bracket also acts as a diagonal brace, triangulating the spindle assembly. We offer aftermarket disc brake systems to best utilize this mounting configuration.

Install Note: This later model spindle can be adapted to your early model Mustang by utilizing a 1969-1973 outer tie rod, spindle nuts, and changing out your wheel bearings and races to the later year model.

Ordering Note: If ordering a Wilwood brake kit from us with your spindle kit you will need to place your order for the 70-73 Mustang Wilwood Brake Kit.

Please See Documents Tab for More Detailed Product Information

Technical Notes

The spindle can be used with most compact and intermediate sized 60’s and 70’s Ford/Mercury vehicles due to common upper and lower ball joint tapers and spindle height.

However, the larger spindle pin and outer tie rod taper, redesigned axle flange, and caliper mounts require brake system upgrades for earlier vehicles.

OEM disc brakes from ‘68-’73, with upright-to-steering arm caliper bracket, can be used. (Granada-style spindle modification required) OEM hubs from ‘68-’69 must change to ‘70-’73 wheel bearings, with larger 1.377” and .865” bore sizes.

The use of ‘70-’73 Mustang or ‘75-80 Granada outer tie-rods or bumpsteer kit is required.
Six-cylinder tie-rod adjusting sleeves prior to 1965, measuring .500” OD (1/2-20), must convert to TCP rack and pinion OR OEM V8 steering systems with .688” OD (11/16-18) sleeves.

NOTE: See applications chart in DOCUMENTS TAB under DATA SHEETS for specific listings.

Video

Details

Shipping Information

  • Item Requires Shipping
  • 18.0 lbs.
  • W12.0000” x H10.0000” x L14.0000”
  • FREE SHIPPING on orders *$199 or more
  • This item ships in its own box.

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.