64 - 66 Mustang Crossflow Aluminum Radiator Module, Extruded Tubes, Dual Puller Fan Module, SBF
1964 - 1966 Mustang Crossflow Aluminum Radiator Module, NEW EXTRUDED Core Design, Small Block Ford Engines, with Spal Dual 11 inch puller Fans and Shroud.
1964 - 1966 Mustang Crossflow Radiator Module with NEW Stronger and More Efficient EXTRUDED Core Design! Will fit Small Block Ford Engines, Single Pass Design, Open, Spal Dual 11'' Fans from Spal. This high-performance aluminum radiator module with fans will perform well in many demanding circumstances. It will bolt to the stock 64-66 Mustang core support with just a few modifications and it's very slim design (6.20" at the deepest point) will provide good clearance with Serpentine front drive systems or stock V belt configurations. It will also work well with Mustangs with A/C Systems that need extra cooling and airflow in the front. The dual electric Spal Fans will pull massive amounts of airflow through the radiator when needed in high heat environments. Mounts with custom aluminum side flanges that eliminate the use of the factory radiator saddles. Inlet is on the passenger side and the outlet is on the driver side, so a reverse rotation water pump is needed. Also, due to the wider width of this radiator, the battery will need to be relocated from the original position. Engineered and Hand Crafted in the USA!
Sold as KIT
Special Notes
This NEW Extruded Tube Crossflow Radiator Module for 64 - 66 Mustangs with High-Performance Small Block Ford Engines developed by CR Racing introduces a revolutionary advancement in cooling technology with an all-new extruded tube aluminum radiator that features a reinforced race fin design.
This exclusive reinforced race fin design is cross-braced for maximum strength and durability. In Addition, it also features a unique shape for additional cooling with a hemmed leading edge for maximum AND durability. This exclusive reinforced extruded tube allows these aluminum radiators to have a 100 PSI burst rating, more than triple the burst pressure of any other performance aluminum radiator in the world!
Developed using our current F1 and NASCAR cooling technology, these extruded tube cores have unmatched performance. You too can now have the same cooling technology for the street as the top motorsports champions use week after week on the track!
PRODUCT FEATURES AND BENEFITS:
– Strong and Efficient Extruded Aluminum Tube
– Race fin that allows the fin more contact area to the coolant tube and more airflow through the fins
– The hemmed leading edge on the fins makes for a stronger fin - does not fold over as easy as regular fin cores.
– 100 psi burst pressure
– Unmatched Performance and Efficiencies for the street
For over 25 years, C&R Racing has supplied cooling systems for Champions in NASCAR, IndyCar, NHRA, ALMS, Grand-Am, & SCCA. Now you can experience the same level of quality cooling products, engineered for your 1964-66 Mustang with SBF engine. C & R Performance introduces a thinner, high-performance crossflow radiator module for your 64 - 66 Mustang with Small Block Engines using aftermarket serpentine drive systems. Only 6.20" thick with Spal dual 11" fans, provides excellent airflow and proper air conditioning airflow. Our 36 mm core single row core offers close tube centers, so it had more tubes than the standard 2-row core. Comes with billet radiator cap and Spal 11" Puller fans already installed with Shroud. Engineered and handcrafted in the USA!
Please Note: Requires new mounting holes to be drilled in the core support of your Mustang as it does not use factory mounting all the opening of the Core support should be enlarged to allow more airflow through the larger core of this radiator.
Technical Notes
Inlet Size: 1.50 in
Outlet Size: 1.75 in
Outlet Location: Lower drivers side
Entire Assembly with 11" Fans is only 6.2 Inches thick at the widest point (fan motor)
Billet Radiator Cap Included
Battery Must be re-located from the stock position
Details
Shipping Information
- Item Requires Shipping
- 38.0 lbs.
- W13.0000” x H38.0000” x L24.0000”
- FREE SHIPPING on orders *$199 or more
- This item ships in its own box.
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!