67 Mustang Ididit Tilt Steering Column, Paintable
1967 Mustang Ididit Paintable Tilt Steering Column
Ididit Introduces The Ford Top Shaft And Ford Turn Signal Switch Collapsible Steering Column For The 1967 Ford Mustangs! This Made To Fit Column Includes Age Specific Style Knobs & Handles And Will Also Include The Male & Female Plugs With Terminals.
Sold as KIT
(The Installation Hardware Above Is Included with the Column)
Ididit's new 8-position tilt 1967 Mustang column will accept a stock Mustang steering wheel or an aftermarket wheel with an adaptor. By using the stock underdash mount and floor mount and installation kit purchased separately (See recommended products below), the installation will be a snap! An OD sleeve will come with each column purchased to fill the gap between the floor mount and the column. As always, all ididit columns are American Made!
INSTALL NOTE: This 1967 tilt column will work with a stock steering box. If using with the stock steering box, we highly recommend purchasing the box hook-up kit shown in the "Recommended Items" section below.
If you have an aftermarket Rack and Pinion Kit, please give us a call and we can supply the appropriate shortened column at the same price and help with a linkage kit.
Self-Canceling Turn Signals
Knobs and Handles
Ford Turn Signal Switch
Ford Top Shaft
Uses Ford Factory style wiring for easy interface to the Classic Mustang wiring.
Floor Mount included w/ Seal.
3/4" 36 Lower Shaft
Finish: Paintable Steel
Steering Wheel Bolt Pattern: Ford Top Spline
Note: A stock Ford wheel will bolt on the top this column. Factory Horn hook-up without modifications to wheel. (Unlike the Competition!)
- Item Requires Shipping